GB 11799-1989 船用防爆离心通风机

作者:标准资料网 时间:2024-05-13 06:31:28   浏览:8800   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:船用防爆离心通风机
英文名称:Marine explosion-Proof type centrifugal fans
中标分类: 船舶 >> 船用主辅机 >> 舱室辅机
ICS分类: 造船和海上建筑物 >> 船舶和海上建筑物综合 >> 船用通风、空气调节和供热系统
替代情况:被GB/T 11799-2008代替
发布部门:国家技术监督局
发布日期:1989-11-21
实施日期:1990-07-01
首发日期:1989-11-21
作废日期:2008-09-01
主管部门:中国船舶工业集团公司
归口单位:全国船用机械标准化技术委员会
起草单位:上海船舶设备研究所
出版社:中国标准出版社
出版日期:1900-01-01
页数:9页
适用范围

本标准规定了船用防爆离心通风机的产品分类、技术要求、试验方法和检验规则等。本标准适用于抽除船舶上油舱、货舱、泵舱、蓄电池舱、弹药舱、飞机库、油漆间等场所含有易燃、易爆混合性气体或蒸汽的防爆通风机。也适用于抽除陆上各部门含有危险性气体的防爆通风机。本标准还适用于船舶其他舱室和陆上各部门通风换气用的防爆通风机。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 船舶 船用主辅机 舱室辅机 造船和海上建筑物 船舶和海上建筑物综合 船用通风 空气调节和供热系统
下载地址: 点击此处下载
Product Code:SAE AMS4117
Title:Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr, (6061; -T6, -T651), Solution and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of rolled or cold-finished bars, rods, and wire and of flash welded rings and stock for flash welded rings.These products have been used typically for parts requiring moderate strength where limited formability is acceptable, but usage is not limited to such applications.【英文标准名称】:StandardSpecificationforFilledEpoxy-CoatedSeven-WirePrestressingSteelStrand
【原文标准名称】:涂环氧树脂的七股预应力钢丝绳的标准规范
【标准号】:ASTMA882/A882M-2004a(2010)
【标准状态】:现行
【国别】:美国
【发布日期】:2004
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.05
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:
【英文主题词】:coatingrequirements;corrosionresistance;epoxycoating;prestressedconcrete;steelwire;strand(tendons);Epoxy-coatedsteelwire--specifications;Filledepoxy-coatedsteelwire;Prestressedconcrete;Prestressingsteel;Seven-wirestrand(tendon);S
【摘要】:1.1ThisspecificationcoversASTMSpecificationA416/A416Mlow-relaxationGrade250andGrade270seven-wireprestressingsteelstrandwithprotectivefusion-bondedepoxycoatingappliedbytheelectrostaticdepositionmethodorothermethodthatwillmeetthecoatingrequirementsinSection8,and,exceptasallowedby1.2,withtheintersticesofthesevenwiresfilledwithepoxytominimizemigrationofcorrosivemedia,eitherbycapillaryactionorotherhydrostaticforces.Note18212;Themanufacturerasidentifiedthroughoutthisspecificationisthecoatingapplicator.1.2Uponspecialrequestbythepurchaser,theintersticesareleftunfilled.Note28212;Unfilledstrandcancorrodefromtheinsideanditsapplicationforprestressingtendonsinconcreteorforrockandsoilanchorsisnotrecommended.1.3Thisspecificationisapplicableforordersineitherinch-poundunits(asSpecificationA882)orSIunits[asSpecificationA882M].1.4ThevaluesstatedineitherSIunitsorinch-poundunitsaretoberegardedseparatelyasstandard.Thevaluesstatedineachsystemmaynotbeexactequivalents;therefore,eachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththestandard.
【中国标准分类号】:H49
【国际标准分类号】:77_140_65
【页数】:5P.;A4
【正文语种】:英语